Are there stains on your property’s exterior surfaces? We understand how frustrating this situation can be. Nobody wants their home or business to be covered with unsightly blemishes, but if you don’t know how to remove these marks, you’ll have no choice but to deal with them. Don’t let this happen—instead, reach out to Chicagoland Pressure Washing. We know the best ways to remove stains from exterior surfaces, and we’ll share this knowledge with you below.
In this blog, we’ll review various surface stains and how to remove them with pressure washing. Then, consider an appointment with us. We’d be happy to help you out no matter where you are in the Chicago area!
Dirt Stains and Other Basic Debris
It really doesn’t take much for stains to appear on your property’s exterior. Perhaps the most common source of these stains is dirt. Dirt, as you already know, is everywhere outside. It is tracked around by shoes and tires, and it’s blown around by the wind. It’s only a matter of time before it winds up on your property’s exterior surfaces. You might not notice its arrival at first, but eventually, your home or business will be noticeably darker and uglier than before.
The good news is that getting rid of dirt isn’t that difficult. A simple pressure washing should be enough to put an end to this problem. What is pressure washing? It’s the process of using pressurized water to clean exterior surfaces. With a pressure washer, you can spray exterior surfaces and remove dirt stains easily.
Moss, Mold, Algae, and Other Organic Debris
Have you noticed green and brown streaks or patches growing on your property’s exterior surfaces? If so, it could be that your home or business’s surfaces have become infested. Moss, mold, and algae are usually to blame. These organisms begin their life as spores floating around in the wind. Eventually, they land on surfaces—such as your property’s exterior—and begin to sprout. This finally results in fully grown moss, mold, and algae on your home or business, releasing spores of their own and potentially irritating your eyes, lungs, and throat.
The best ways to remove stains related to moss, mold, and algae are a) killing the organic materials first and b) removing everything with pressurized water. This ensures that no spores allow regrowth. At Chicagoland Pressure Washing, we use two simple steps to effectively remove all organic debris. First, we use a sodium hypochlorite pre-treatment to kill moss, mold, and algae. Then, we thoroughly pressure wash the area, allowing us to remove all grime.
Spray Paint and Graffiti
It’s incredibly frustrating to step outside your home or business only to discover unwanted graffiti. Unfortunately, vandals are a reality of the world we live in. You can’t prevent them entirely, but you can discourage them—and one of the best ways to do this is with pressure washing. By promptly removing graffiti, you show vandals that their efforts are simply going to waste.
What are the best ways to remove stains like spray paint? Pressure washing is much more effective than you might have first thought. The high-impact kinetic energy of pressure washing breaks the bond between paint particles and exterior surfaces. The removal of spray paint is made even easier when hot water is used. You can also use pressure washing to remove wads of chewing gum that vandals have left behind.
Oil Stains on Pavement
It’s extremely frustrating when your car leaks oil. The worst part is that you might not even notice this problem until it’s too late. Picture this: you drive your vehicle aside, only to discover that it’s been leaking oil the whole time. At this point, oil has already penetrated deep within your pavement, forming difficult-to-remove stains. What are you supposed to do now? Deal with the problem and just let your pavement have permanent staining? Don’t do that—instead, learn the best ways to remove stains and solve this dilemma entirely.
We highly recommend the use of sodium hypochlorite when treating oil stains. This helpful chemical will shatter the bond between oil particles and pavement. Then, high-pressure water is used to lift oil out of your concrete’s pores. This drastically improves your concrete’s appearance.
Removing Rust Stains
Rust is frustrating, but it’s a fact of life. When iron chemically reacts with oxygen, the result is rust. It’s not just metal surfaces that can rust, either. You might also find rust stains on other materials, such as concrete. When this happens, it’s because iron particles have leeched onto the surface from a separate item, such as gardening tools or metal furniture.
While rust stains may be frustrating, don’t worry because they don’t have to be your problem forever. With pressure washing, you’ll be able to get rid of them. Additionally, there are specialized rust removal chemicals you can use to facilitate the pressure washing process. For example, hydrochloric acid reacts with iron oxide, breaking it down and making it easier to remove.
How Professional Services Help
In this blog, you’ve discovered some of the best ways to remove stains from your property’s exterior surfaces. However, there’s one avenue for stain removal that you may not have considered yet: professional pressure washing. By letting a team of experts pressure wash your property’s exterior surfaces, you won’t have to worry about doing the work on your own. Instead, you can sit back and relax while a team of experts handles the cleaning for you.
Another benefit of professional pressure washing is the high-quality results. DIYers who aren’t as experienced in exterior cleaning may find themselves struggling to remove tough stains. On the other hand, the team at Chicagoland Pressure Washing ensures their complete elimination—as well as sparking clean results.
To get started with us, contact us online with a brief description of your project. We will give you a free estimate for your consideration; then, you can choose a time and date for our arrival. We look forward to hearing from you. See the best ways to remove stains in action!
